Jade Ice prp Ceramic Coating, 50ml

Jade Ice PRO can be applied to all exterior vehicle surfaces. Although It is not recommended for glass since an improper application can affect visibility. For all other exterior surfaces, Jade Ice is a very effective, transparent protective coating. Jade Ice PRO can also be applied to:• Wheels • Plastic Vehicle Trim • Bumpers Trim and Moldings • Chrome and Aluminum Surfaces • Vehicle Painted Surfaces (not Matte Finishes)  

Application Directions:
1. Correct paint to remove correctable blemishes and swirls.
2. Be sure to clean the surface with a 15% IPA solution to remove all polishing oils, waxes, and silicones.
3. Prime the included applicator by making an X pattern across the pad. Only a few drops of Jade Ice will be needed for each subsequent panel.
4. Hand apply Jade Ice PRO onto a single panel at a time in a thin layer using circular or front to back direction motions.
5. Within 5-6 minutes, inspect the panel with decent lighting looking for any thick areas that have not converted to being clear yet.
6. Use the included microfiber applicator to level out any areas where you may see some streaks. This step is important, as any areas not leveled-out will have to be polished if allowed to cure. Panels may feel a little tacky and will be self-leveling during cure time, so avoid any unnecessary wiping, wiping, or other contacts to yield the very best results.
7. Repeat steps 1-6 for each panel where an application is desired.